Page 1 of 1

Fuji RS-485 vs Flex RS-485 wiring

Posted: Tue May 22, 2018 2:19 pm
by om_tech_support_KR
Q: I am trying to use the suggested RS485 converter on the Fuji that I had used with your previous products but I cannot make a connection.

A: The wiring on the Fuji products does differ from our standard products. This would be the wiring for our standard products.

rj.png
rj.png (33.22 KiB) Viewed 113 times


rs485.png
rs485.png (15.39 KiB) Viewed 113 times

For the Fuji product you would use the same pin 2 for GND but the T+ (DX+) would be pin 5 white/blue and T- (DX-) would be pin 4 blue on both RJ-45 cable types.
http://www.orientalmotor.com/products/p ... df#page=19

rs fuji.png
rs fuji.png (15.84 KiB) Viewed 113 times