Oriental Motor is pleased to announce our new line up of PKP Series High-Torque stepping motors. Now available with more frame sizes, varous windings, and an improved SH spur gearhead option for faster speeds with less backlash!
Frame sizes are 20mm (0.79 in), 28mm (1.10 in), 35mm (1.38 in), 42mm (1.65 in), and 56.4/60mm (2.22/2.36 in). Also offered is an optional 200 or 400 line encoder with either 2 or 3 channels.
ACHIEVES HIGH TORQUE!
When comparing the new PKP series stepping motors to our older PK series stepping motors, the PKP series offers a torque increase of 1.2 to 1.7 times. This is due to improvements in the rotor/stator design, air gap thickness, increased winding density and magnet material.
BENEFITS OF HIGH TORQUE:
1. REDUCED POWER/ENERGY CONSUMPTION
We know that power in watts is volts x current, and we know that torque is proportional to current. Since the PKP series high torque stepping motors offers more available torque that may not be necessary, we can actually turn down the current setting to reduce the motor's torque which in turn will also reduce the motor's energy consumption.
2. REDUCED MOTOR OPERATING TEMPERATURE
Current is also proportional to a motor's operating temperature. Turning down the motor's current setting will also reduce the motor's operating temperature.
3. INCREASED MOTOR LIFE
It is known that a 15 deg C reduction in bearing temperature doubles its life.
Bearing Life Formula
4. ABILITY TO DOWNSIZE MOTOR
Since the PKP series stepping motors offer more available torque, downsizing of the motor is possible in many cases. The image below compares a 56.4 mm frame size PKP series motor and a 42mm frame size standard PK series motor which have very similar performance characteristics.
For more information, specifications, or dimensional drawings of the PKP series stepping motors, please click the link below:
http://www.orientalmotor.com/products/p ... ochure.pdf
1.8 DEG STEPPING MOTORS OVERVIEW (INCLUDES OTHER SERIES):
http://www.orientalmotor.com/products/a ... y-1-8.html
Announcements related to New Products, Trainings, Software Updates, etc can be found here.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests