Introducing CRK FLEX, Stored Data Series

Announcements related to New Products, Trainings, Software Updates, etc can be found here.
User avatar
om_tech_support_JT
Posts: 1057
Joined: Fri Mar 12, 2010 2:59 pm
Location: Torrance, CA
Contact:

Introducing CRK FLEX, Stored Data Series

Postby om_tech_support_JT » Wed Jun 05, 2013 11:53 am

Oriental Motor USA is pleased to announce the expansion of our CRK Series product line with the introduction of our built-in controller (Stored Data) type. The CRK Series is now available in an open frame pulse input type, built-in controller (Stored Program) and now built-in controller (Stored Data) type. The compact driver saves space and can be mounted on a DIN Rail for space saving advantages.

CRK FLEX product picture, motor and driver with built-in stored data controller.jpg
CRK FLEX product picture, motor and driver with built-in stored data controller.jpg (28.24 KiB) Viewed 4310 times

The CRK Series uses a 0.36° or 0.72° stepper motor and is able to divide the basic step angle of the motor into a maximum of 250 divide without using any mechanical elements such as a reduction gear. As a result, vibration and noise are greatly reduced. For improved positional accuracy, stop positional accuracy of 2 arc minutes or 0.034° (no load) is possible with the 0.36° high-torque type stepper motor.

CRK FLEX stop position accuracy of 2 arc minutes for high resolution models.jpg
CRK FLEX stop position accuracy of 2 arc minutes for high resolution models.jpg (110.2 KiB) Viewed 4310 times

The CRK Series is offered with two motor resolution options:
• 0.36° High-Torque / High-Resolution
• 0.72°
- High-Torque
- Standard
- Standard with Electromagnetic Brake
- Gear types

For geared options, the Taper Hobbed gear, Planetary (PS) gear and Harmonic are all available with the 0.72° motor.
Encoder Motors are available on all models except 1.10 in. (28 mm) motors and electromagnetic brake motors.
Encoder type: 3-channel Differential Type

Oriental Motor is also introducing Electromagnetic brakes on the 0.72° stepper motors, round shaft only, size 1.65 (42mm) and 2.36 in. (60mm) cable
type motors.
*Note: this motors will also be available as a motor only offering on the website under the 0.72° stepper motors.

ABOUT THE BUILT-IN CONTROLLER:
The built-in controller (stored data) type driver is part of our Flex product offering. FLEX is the family name for products that are designed to be used for Factory Automation (FA) network control via I/O control, Modbus (RTU) control, or a network converter.

CRK FLEX lower vibration and noise achieved by microstepping, smooth drive.jpg
CRK FLEX lower vibration and noise achieved by microstepping, smooth drive.jpg (85.45 KiB) Viewed 4310 times

CRK FLEX better speed regulation with smooth drive.jpg
CRK FLEX better speed regulation with smooth drive.jpg (107.07 KiB) Viewed 4310 times

The built-in controller also features the following key points:
• Data Setting type
• Positioning Operation
- Linked Operation
- Sequential Operation
• Speed Control Operation
• Return to Home Operation
• Group Sending Function
• I/O
- Many inputs for various
actions from start, home, limit
sensors etc.
- 4 outputs (general purpose)

ACCESSORIES (Sold Separately):
Please use the MEXE02 data setting software or the OPX-2A hand-held control module (available as an optional accessory) to set the motion data and parameters. To help the customer get started easily and quickly, the MEXE02 software is available for a free download at http://www.orientalmotor.com/support/so ... index.html.

Promotional Offer (one per customer):
One free CC05IF-USB communication cable is offered for testing purposes.

We're please to offer a very competitive starting price of just around $400 for a complete step motor, driver and controller system. Please check our website for promotional pricing. You are welcome to discuss your motor application with our technical support engineers to determine if the CRK FLEX, stored data series would work for you.

For more information regarding the CRK FLEX, stored data series, please click the link below:
http://www.orientalmotor.com/products/s ... er-dc.html

For more information regarding our FLEX family of networkable products, please click the link below:
http://www.orientalmotor.com/products/p ... ochure.pdf

For more information regarding control methods for FLEX products, please click the link below:
viewtopic.php?f=26&t=716

Return to “Latest Announcements”

Who is online

Users browsing this forum: No registered users and 5 guests