Q: I'm considering switching my current PK series standard step motors to your new PKP series high torque series step motors. What are the differences that I should be aware of, and what else can I expect to gain besides being able to drive bigger loads and accelerate quicker?
A: Due to improvements in its design, our new PKP series stepper motors output higher torque than its predecessor, the PK series. There are many ways that the user can utilize the extra torque to maximize the performance of the motor. The obvious improvements would be bigger loads and quicker acceleration, but there are numerous other benefits which we will go over in this article.
First, I will focus on the one physical difference which is the added connector on the PKP series stepper motors compared to the traditional lead wires on the PK series stepper motors.
To best illustrate the differences, please see the side-by-side comparison below between a PK series model, PK264M-E2.0A, and its PKP series equivalent model, PKP264MD28AA-L.
SPECIFICATIONS AND DIMENSIONS
As you can see, besides higher torque output, there are only minor differences in the electrical winding specifications which will not affect its performance, and the only physical difference is the connector. As long as you have some space around the motor, you can incorporate the new PKP series motors easily. We also provide a free motor cable for all PKP series models.
The PKP series offers the same frame sizes available in the PK series (except for 85/90mm), 1.8 deg and 0.9 deg resolutions, encoder models, more bipolar windings options, and an improved SH spur type gearhead option for faster speeds with less backlash.
When comparing the new PKP series stepping motors to our older PK series stepping motors, the PKP series offers a torque increase of 1.2 to 1.7 times. This is due to improvements in the rotor/stator design, air gap thickness, winding density and magnet material.
BENEFITS OF HIGH TORQUE MOTORS:
Now let’s discuss how to maximize the performance of these high torque motors.
1. REDUCE CURRENT TO REDUCE POWER/ENERGY CONSUMPTION
We know that power in watts is volts x current, and we know that torque is proportional to current. Since the PKP series high torque stepping motors offers more available torque that may not be necessary, we can actually turn down the current setting to reduce the motor's torque which in turn will also reduce the motor's energy consumption.
2. REDUCE CURRENT, TORQUE TO REDUCE VIBRATION
Since too much excessive torque could turn into vibration, and current is proportional to torque, we can reduce the current for the PKP series high torque motor in order to reduce vibration.
3. REDUCE CURRENT TO REDUCE MOTOR OPERATING TEMPERATURE
Current is also proportional to a motor's operating temperature. Turning down the motor's current setting will also reduce the motor's operating temperature if temperature is an issue for your application.
4. REDUCE CURRENT, TEMPERATURE TO INCREASE MOTOR LIFE
It is known that around a 15 deg C reduction in bearing temperature approximately doubles the expected motor life. Since the bearing of a stepper motor is the only component that can fail, we base the life of a stepper motor on the bearing grease life. The grease life graph below shows this approximate increase in life.
To show the exact difference in life, I’ve shown the actual calculations below for 95 deg C and 80 deg C motor surface temperature.
t = average grease life in hours
n = speed in RPM
Nmax = max bearing speed with grease lubrication in RPM
T = motor surface temperature in deg C
NOTE: 0.25 </= n/Nmax </= 1; when n/Nmax < 0.25, assume n/Nmax = 0.25
If T = 95℃ and n/Nmax = 0.25, we have 15,940 hours
If T = 80℃ and n/Nmax = 0.25, we have 28,184 hours
If T = 70℃ and n/Nmax = 0.25, we have 41,210 hours
5. ABILITY TO DOWNSIZE MOTOR
Since the PKP series stepping motors offer more available torque, downsizing of the motor size is possible in many cases. The image below compares a 56.4 mm frame size PKP series motor and a 42mm frame size standard PK series motor which have very similar performance characteristics.
And if these benefits do not appease you, we are offering a new lower price for all PKP series stepper motors to make them even more cost-effective than the PK series stepper motors.
For more information, specifications, or dimensional drawings of the PKP series stepping motors, please click the link below:
http://www.orientalmotor.com/products/p ... ochure.pdf
For assistance on selecting drivers, controllers, and/or accessories for your PKP series stepper motor, please visit our website (http://www.orientalmotor.com) or discuss your requirements with our technical support group (800-468-3982 or [email protected]).
1 post • Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 2 guests